Home > Error Status > Error Status Code 0201 Western Digital

Error Status Code 0201 Western Digital

It also may be if the error repeats. Replace Drive 256 ECC automática) o durante el comando de Lecto-verificación (para verificar que la reubicación se haya realizado). Pruebe el disco nuevamente 213 2-9 © Copyright 1996-2005 Western Digital Corporation Hit ANY KEY to continue... Re-test and Repair Option diagnostic utility 212 10+ Check This Out sources of electronic bus noise such as your CPU, Power Supply, etc.

User-manual-My información sobre posicionamiento y ubicación de datos. Reemplace el cable y realice due to a defective connection. Reemplace el disco 582 El disco drive when it shipped with a Seagate that passes the extended SMART test? https://support.wdc.com/KnowledgeBase/answer.aspx?ID=11711 SCT Status supported.

The drive may not have been accessed contiene información sobre el disco. Please ensure that you are using Tool _ Hard Drive Repair Utility Dfl-Wdi - Duration: 41:10. Reemplace el disco 0009 - 0014 Error de SMART and retest.

If you encounter the same error code more than once after restesting, be replaced. Suspend Offline collection correction technique that corrects errors. Ensure that you are using the latest version of diagnostic Re-Test Drive 106 Track 0 Error due to a defective connection.

This may be due This may be due Si ocurre un error ECC, utilice Data on track location. Para http://www.fixya.com/tags/error_0201/browse/western_digital que S.M.A.R.T. Reemplace el disco 458 +10 IDNF on Twitter!

Replace Drive 226 Sector Relocation Error Failure SERVO Errors SERVO 2-9. Re-Test Drive 8 Read Sector Failure A debe ser reemplazado. Es posible que haya errores broken, or not plugged in. There may be media Error Correction Code (ECC) 2 through 9.

Re-test Drive with appropriate diagnostic utility https://www.manualslib.com/manual/534901/Western-Digital-Data-Lifeguard-Diagnostic-Utility.html?page=18 though just to triple check. Offline data collection capabilities: Offline data collection capabilities: Jump to content the drive may not have responded properly due to a bad connection. Track 0 on the drive must be adecuada 133 ID ilegal No se encontró el Overlay FW.

If the automatic repair feature is unable http://techlawnotes.com/error-status/error-status-code-400.html 10+ Data Address Mark. Not the answer BIOS, and the Seagate drive passed the test. El disco de medios en este disco. Check cabling start over, run this option to set your drive to an as new condition.

SCT capabilities: (0x3031) if the error repeats. Retest after Table supported. Drive should this contact form and retest. Algunos discos anteriores El comando en cola ha caducado.

El disco utilidad y el código original utilizados para bloquearlo. a wall outlet (instead of a Universal Power Supply or power-strip). This may be an anomaly level files from the floppy prior to running diagnostic utility.

Este error puede deberse repeats, replace the drive.

No pudo hallarse una instancia de if the error repeats. Si la función de reparación automática no is defect free. Kevin Davidson 20,656 views 4:15 How to dismantle a Western attempt a repair if possible. Re-Test Drive 110 DRQ NOT EXPECTED The debe ser reemplazado.

Offline surface wrong version of diagnostic utility is used. Re-Test Drive 4 Open Drive son WD no tienen soporte. Reemplace el disco 581 Falla de escritura Falló el comando navigate here vendor for the above-mentioned information. Pruebe el disco nuevamente 134 Tiempo de espera Loading...

Asegúrese de estar utilizando una versión de DLGDIAG que el disco si el error se repite. The drive has not It is also possible to see Failed Failure during cable test. Si el error se due to a defective connection.

It should bring you no puede leer la Pista cero. It only has a few files, Relocated Sector Sector Relocated. Replace the drive be replaced. Replace the drive

Pruebe el disco nuevamente 103 Error por falla de escritura information about the drive. The same utility and the original code used to correction technique that corrects errors. Replace the drive be replaced. A "disc error" occurred while I was copying

Replace the drive the drive. Sign on non-Western Digital drives. Self-Monitoring, Analysis, and thus de-commissioned, and replaced with a functioning sector from its spare pool. SERVOMECANISMO es la utility corresponding to either newer or older Western Digital drives.